How to fix the sensor on the surface of the object under test?

Brief:In general, there are three ways to fix the sensor on the surface of the object under test : 1. Magnetic hold-downs: when the measured object is metal and the surface of the object is flat, the magnetic hold-downs can be used to fix, this way can be temporary or long-term use. Each sensor has a corresponding magnetic hold-down. 2. Tape: When the object under test is not suitable for magnetic hold-down and the detection is short term, the sensor can be glued to the surface of the object using t

In general, there are three ways to fix the sensor on the surface of the object under test

 

1. Magnetic hold-downs: when the measured object is metal and the surface of the object is flat, the magnetic hold-downs can be used to fix, this way can be temporary or long-term use. Each sensor has a corresponding magnetic hold-down.


2. Tape: When the object under test is not suitable for magnetic hold-down and the detection is short term, the sensor can be glued to the surface of the object using tape. This way is not suitable for long-term fixing of the sensor.


3. Resin glue: When it is necessary to use the sensor for long-term detection, you can use resin glue or similar glue to fix the sensor on the surface of the object under test.







 

Контакт

Горячая линия: +86-20-32290092Телефон: +86 19128609186Электронная почта:sales2@ae-ndt.comСкайп: Джессикаджия

9:00-18:00 (UTC+8)

Подписывайтесь на нас

YouTube

Фейсбук